|
FAQ
• Search • Login |
|
It is currently Tue May 21, 2024 6:09 pm
|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 1 post ] |
|
Author |
Message |
peppe
Site Admin
Joined: Sun Aug 03, 2008 9:59 pm Posts: 447
|
Input settings
What are the standard settings for the input cards? Below is a list of inputs and the tried and tested best settings. --------------------------------------------------------- S-video / Composite Input (Standard) Driver Btwdmdrvinstaller5.3.5 - Format YUY2 25.00fps,768x576,16BPP - TV Standard PAL_I - FPS 25.0 - Input 1 S-Video 2 Composite
Depending on which input you are using ----------------------------------------------------- 4 way Input Card - Driver 4inputcapture3-1.exe - Format YUY2 25.00fps,768x576,16BPP - TV Standard PAL_I - FPS 25.0 - Input 1. Input 1 2. Input 2 3. Input 3 4. Input 4
Depending on which input you are using. ------------------------------------------------------- SDI Input Card
Driver Sweetspot_WDM_driver - Format UYVY, 25.00FPS, 768 x 576, 16BPP - TV Standard PAL_I - FPS 25.0 - Input 8: Video SerialDigital ------------------------------------- Dual & Single VGA Input - Driver visRGBpro Install.exe - Format RGB565 70.fps, 1024 x 768, 16 BPP - TV Standard None - FPS 70.0 - Input Standard
A thing with capture card settings... TV Format will vary depending on continent and country. For an example here in Scandinavia we use PAL-B. Usually when installing your driver you can select what country you are in, then you wont get confused with all these different standards.
_________________ Peppe Tannemyr SSR Beacon DigiGobos® Sweden retailer of Hippo systems
|
Sat Aug 09, 2008 9:56 am |
|
|
|
|
Page 1 of 1
|
[ 1 post ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|