How do I configure a Hipponet network?
Actually it's very easy because most of the configuration of the network is automatic.
The most important thing to ensure is that all the Hipponet devices on the network have their network ports set to the same IP address range. For example if one machine is configured with an IP of 192.168.0.5 and a subnet mask of 255.255.255.0 then all the other devices need to have an address that starts with 192.168.0.X where x can be any number from 0 to 255.
As long as the ip range is correct then all the Hipponet devices should find each other and configure themselves automatically.