Deprecated: Function set_magic_quotes_runtime() is deprecated in /storage/content/56/139156/ on line 106 Hippotizer Forum Scandinavia :: View topic - Capture on Chipmunk
Hippotizer Forum Scandinavia

Capture on Chipmunk
Page 1 of 1

Author:  peppe [ Mon Aug 18, 2014 10:42 am ]
Post subject:  Capture on Chipmunk

The BlackMagic UltraStudio SDI USB3 is the unit for this, seems to work good and just maybe don´t have the perfect "lipsync" latency, but overall good and
worth the price. Easy installation and stabile as we have seen so far. ... studiousb3

Note: SDI model, not the table version with level meters, scroll down and you find it.

Newer HippoPortamus machines now support the Black Magic UltraStudio SDI USB3 Capture card.

This only applies to HippoPortamus and Chipmunk´s machines that have USB3 connections and are running Windows 7.
In order to install this device please follow these steps:

-Download the drivers from the Black Magic Website, which can be found here. We have tested versions 9.7.1 and 9.7.5 with Hippotizer Version 3.2 and found them to work well.

-Extract and install the drivers onto your HippoPortamus

-When prompted, restart the machine.

-Plug the SDI capture box into your USB3 outlet. (It must be one of the blue USBs sockets).

-Plug an SDI source into the capture device noting it's resolution and frame rate.

-Start the Hippotizer Engine and set a layer source to capture and SDI 1.

-In the engine settings, under live input settings, select the black magic card and adjust it to the correct resolution and frame rate.

You should now have a live input coming into your Hippotizer.

Testing has shown that there is approximately a 2.5 to 3 progressive frame latency (40 - 50ms) with this capture device.

Applies to software versions

3.2, 3.2.1
Applies to hardware versions (serial Numbers)

Portamus 1050 and above / chipmunk

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group