The Graphics cards in a Genlock HD output one either 1 x DVI and 1 x Display Port (the FirePro 7800) or, 2 x Display Port connectors (FirePro 7900).
These Display Port cables are then adapted to DVI in order to go through the DVI Parrots.
The Display Port to DVI adapters limit the available resolution on each output to 1920 x 1200 pixels (DVI Single Link). This is caused by limitations of the DVI adapter. There are Display Port to Dual Link DVI converters on the market, however we have not found one robust enough yet to be installed permanently into a Hippotizer.
If you require resolutions higher than 1920 x 1200 from a Genlock HD, please bypass the Display Port Adapter and DVI Parrot by plugging straight into the Graphics Card.
Applies to software versions All
Applies to hardware versions
Genlock HD's
_________________ Peppe Tannemyr SSR Beacon DigiGobos® Sweden retailer of Hippo systems
Users browsing this forum: No registered users and 3 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum