Deprecated: Function set_magic_quotes_runtime() is deprecated in /storage/content/56/139156/ on line 106 Hippotizer Forum Scandinavia - View topic - Hippotizer v3.1.0 BETA II Installer
It is currently Tue Aug 09, 2022 6:15 pm

Post new topic Reply to topic  [ 1 post ] 
 Hippotizer v3.1.0 BETA II Installer 
Author Message
Site Admin
User avatar

Joined: Sun Aug 03, 2008 9:59 pm
Posts: 447
Post Hippotizer v3.1.0 BETA II Installer
If you want to try this out, please send a mail for password. Remember it is a BETA so some bugs will be there, trust me....
And contact GH direct on support for issues regarding the beta version.

Hippotizer installation notes

Version 3.1.0 BETA

revision: 9016
installers: Hippov3.1.0 BETA II

For support issues, please go to,

Or email with "HippotizerV3.1 Beta" in the subject line.

Known issues:

- With version 3.1 the installer will prompt you to update the ATI drivers to version 10.10. If you have a unit with ATI Radeon HD 1950 or older cards installing this driver during the install process will cause those graphics card to become uninstalled in windows and fail to work. If you have a Hippotizer system with a 1950 card you must uncheck the option to update the ATI driver (to check the cards you have installed use the ATI catalyst control software to check the hardware).

If you have accidently installed the 10.10 drivers and need to re-install the previous drivers, use the following link to download 9.3 drivers. The software will still function correctly with the older drivers. ... 25&nav=0,3

CITP component:
- Capture polar crashes hippotizer when trying to retrieve thumbnails

Text Engine:
- Text document hicks when loading second page

- Relays dont work on UberPan slaves

Video Capture:
- Blackmagic Decklink cards are now supported in hippotizer, specifically the DeckLink SDI, DeckLink Duo and the DeckLink Studio. To use these cards with Hippotizer you need to have DeckLink 7.9.4 for Windows installed. If required, you can download it from; ... nav=0,3,15

Known Issue, if you enable disable the decklink input a large number of times (e.g. ~500 times) the decklink card may become unresponsive. i.e. will not display incoming signal. If this happens you need to shut down the system and restart it and don't enable/disable the bmagic input so much during your performance. This appears to be a limitation in the deckink card/driver.

-Datapath have a few new cards since the release of Hippotizer 3.0.14 SP1, to use the Single DVI + 4 Composite Input Card or the 8x Composite Input Card you need to install the Vision V6.0.5 10.06.2011 vision. To download these drivers use; ... nav=0,3,15

Virtual Media Manager:
- VMM will re-split partial media even if partial media exists for this output
- If two partial media are exactly the same, Media Player on slave hippos fails to recognise one of them

New and repaired in this version

New Features:
- UberPan component: It is a system designed to easily manage and use multi output configurations
- DMX2 - New improved DMX component. Create your personalities with the Personality Editor and control different parts of multiple hippos from one component.
- Hippotizer HD goes 16 Layers
- New product: GrassHopper with max 8 full HD layers
- Portamus goes full HD on all layers
- Live Mask: This gives the user the ability to draw masks in realtime onto any layers or the master
- Improved logging: Each component has its own log level for better support
- SpeedoMeter added to monitor engine performance information
- RealTimeSync component: this component which does not have a GUI generates a SMPTE timecode signal that is equal to the system clock. This can be used by a timeline to make the timeline realtime (ie. 3:00:000 on the timeline would be at 3:00am real time. Very useful for realtime scheduling.

- new: GUI Re-skinning: New look and feel of ZooKeeper with focus on better usability and performance
- new: ZooKeeper host gets its name from the machine name
- new: GUI: Color coded Keystone
- new: GUI: Check box added for permanent fine control
- fix: GUI: Version on Splash screen is wrong

- new: HD Hippotizer now supports 16 layers
- new: HippoCritter has new Single HD Layer mode
- new: Control Refresh Rate through the Engine Settings
- fix: Synchronizing Factory media was very slow

- new: Option to lock media map added
- fix: Abort button on media manager import does not function correctly.
- fix: Media info doesnt get updated

- new: Toolbox with Pointer, Pen and Hand cursors
- new: Lock/Unlock events
- new: New menu options for Fade Types
- new: Show remaining time in Timeline GUI
- fix: Timeline Playhead overruns stop command
- fix: you can now move events by moving diamonds (previous beta was broken).

Video Mapper:
- new: Export video map as image
- new: Add RGB to contour drop effect
- fix: Zoom fader was not working correctly
- new: Ability to use different pitch display devices and have Videomapper calculate tiles automatically
- new: Grid snap feature
- new: Videomap manager for renaming / ordering maps
- new: Ability to flip/mirror tiles
- new: Ability to mix or morph between 2 videomaps

Pixel Mapper:
- new: KiNet and ArtNet auto-discover devices
- new: Undo/ReDo functionality added
- new: Personalities are now referenced so changes to fixtures can/will be populated through pixelmaps
- new: Gridlines to fixture designer
- new: Pixelmaps are now indexed correctly for DMX and can be shifted up/down list
- new: Colour coding system to fixtures to easily identify patched / locked / unpatched fixtures
- new: Drawing speed is much improved and selection speed greatly improved (over 100x faster)
- dix: Pixelmapper would crash when changing fixtures on large pixelmap
- new: Ability to auto create new fixture personalities from CSV import
- new: Ability to import pixelmap layouts and patching information from Artistic Licence LightTramp
- new: Ability to load background image to help with layout.

Video Input:
- new: Support for BlackMagic products
- new: Support for new Datapath products (Sumesh TODO)
- new: New DVI + 4 x composite as well as the 8 x composite input cards from Datapath.

Dr. Hippo:
- new: Network tester
- new: Option added to Dr. Hippo to zip up the HFWStorage folder

- fix: Automation component: high CPU usage
- new: Beatbridge component: Line based spectrum analyser
- fix: CITP component: when using wysiwyg changes incorrect RGB value
- new: Cue Controller: Monitor timelines and activate cue
- fix: Cue Controller: Changing the timeline name deletes the Cue Action
- fix: FXselection applies two FX when is should switch from one to another.
- new: HippoNet: Allow user to select Network port
- new: Host Manager: Exit host option added
- fix: HFW: Engine crashes on Exit
- fix: LCD component: Browsing the settings causes the engine to crash
- new: Hippo OSC component: Ability to re-map components on import
- fix: Hippo OSC component: tree no longer re-draws and closes everytime you make a change
- fix: PlayList: on restart pre-created play list fails to start correctly.
- Fix: RS232 Component: component reports NO GUI error after setting it up.
- Fix: Screewarp: Be able to multi-select multiple nodes when editing warp
- New: TelNet component: Ability to fire timeline
- fix: Text Engine: Can't use format "centre" with fading text in
- fix: Adding text manager via layer control adds two text manager components.

Peppe Tannemyr
SSR Beacon DigiGobos®
Sweden retailer of Hippo systems

Thu Aug 11, 2011 11:07 am
Profile E-mail
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.