You can control the Hippotizer with a DMX Tail. This consists of a DMX to USB connection. Hippotizer only supports through DMX TAILS . Controlling Hippotizer uses around 455 channels of DMX. This will give you full control of all features on all _layer_s. You can use 4 channels to control pre-made timelines. This gives the user control over the whole Hippotizer using just 4 channels. In Dual mode output the limit is 4 layers on each output,.
DMX Tail is a option and can be bought from us or from Green Hippo Ltd.
Hippotizer can be controlled in different ways through DMX. As standard Hippotizer can be controlled over Art-Net. This is controlled using one of the two network ports on the back of the Hippotizer. Local Area Connection 2 on the back of the unit is used for DMX Control this should be set to an IP address of 2.0.0.?.
Local Area Connection 1 is utilized for HippoNet.
You can also control the Hippotizer with a DMX Tail. This consists of a DMX to USB connection. Hippotizer only supports through DMX TAILS Controlling Hippotizer uses around 455 channels of DMX. This will give you full control of all features on all _layer_s. You can also use 4 channels to control pre-made timelines. This gives the user control over the whole Hippotizer using just 4 channels.
This is similar to the feature of recalling presets in version 2.
_________________ Peppe Tannemyr SSR Beacon DigiGobos® Sweden retailer of Hippo systems
Thu Aug 07, 2008 4:25 pm
Kent Larsson
Joined: Wed Aug 06, 2008 3:11 pm Posts: 67
Re: Basic DMX for Hippotizer
If I have already artnet on my desk, do I need this dmx tail or it is artnet there directly??
_________________ HippoCritter, power for the bucks!!!
Fri Sep 05, 2008 10:17 pm
peppe
Site Admin
Joined: Sun Aug 03, 2008 9:59 pm Posts: 447
Re: Basic DMX for Hippotizer
If you have Artnet, NO need for a dmx tail All Hippos are fitted with one HippoNet port and one standard network port.
_________________ Peppe Tannemyr SSR Beacon DigiGobos® Sweden retailer of Hippo systems
Users browsing this forum: No registered users and 1 guest
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum