It is currently Thu Mar 28, 2024 3:22 pm




Post new topic Reply to topic  [ 3 posts ] 
 Basic DMX for Hippotizer 
Author Message
Site Admin
User avatar

Joined: Sun Aug 03, 2008 9:59 pm
Posts: 447
Post Basic DMX for Hippotizer
You can control the Hippotizer with a DMX Tail.
This consists of a DMX to USB connection.
Hippotizer only supports through DMX TAILS .
Controlling Hippotizer uses around 455 channels of DMX. This will give you full control of all features on all _layer_s.
You can use 4 channels to control pre-made timelines.
This gives the user control over the whole Hippotizer using just 4 channels.
In Dual mode output the limit is 4 layers on each output,.

DMX Tail is a option and can be bought from us or from Green Hippo Ltd.

Hippotizer can be controlled in different ways through DMX.
As standard Hippotizer can be controlled over Art-Net.
This is controlled using one of the two network ports on the back of the Hippotizer. Local Area Connection 2 on the back of the unit is used for DMX Control this should be set to an IP address of 2.0.0.?.

Local Area Connection 1 is utilized for HippoNet.

You can also control the Hippotizer with a DMX Tail. This consists of a DMX to USB connection.
Hippotizer only supports through DMX TAILS
Controlling Hippotizer uses around 455 channels of DMX. This will give you full control of all features on all _layer_s.
You can also use 4 channels to control pre-made timelines. This gives the user control over the whole Hippotizer using just 4 channels.

This is similar to the feature of recalling presets in version 2.

_________________
Peppe Tannemyr
SSR Beacon DigiGobos®
Sweden retailer of Hippo systems


Thu Aug 07, 2008 4:25 pm
Profile E-mail

Joined: Wed Aug 06, 2008 3:11 pm
Posts: 67
Post Re: Basic DMX for Hippotizer
If I have already artnet on my desk, do I need this dmx tail or it is artnet there directly??

_________________
HippoCritter, power for the bucks!!!


Fri Sep 05, 2008 10:17 pm
Profile
Site Admin
User avatar

Joined: Sun Aug 03, 2008 9:59 pm
Posts: 447
Post Re: Basic DMX for Hippotizer
If you have Artnet, NO need for a dmx tail
All Hippos are fitted with one HippoNet port and one standard network port.

_________________
Peppe Tannemyr
SSR Beacon DigiGobos®
Sweden retailer of Hippo systems


Fri Sep 05, 2008 10:37 pm
Profile E-mail
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.