Hippotizer Forum Scandinavia http://www.digigobos.com/forum/ |
|
Input settings http://www.digigobos.com/forum/viewtopic.php?f=13&t=28 |
Page 1 of 1 |
Author: | peppe [ Sat Aug 09, 2008 9:56 am ] |
Post subject: | Input settings |
What are the standard settings for the input cards? Below is a list of inputs and the tried and tested best settings. --------------------------------------------------------- S-video / Composite Input (Standard) Driver Btwdmdrvinstaller5.3.5 - Format YUY2 25.00fps,768x576,16BPP - TV Standard PAL_I - FPS 25.0 - Input 1 S-Video 2 Composite Depending on which input you are using ----------------------------------------------------- 4 way Input Card - Driver 4inputcapture3-1.exe - Format YUY2 25.00fps,768x576,16BPP - TV Standard PAL_I - FPS 25.0 - Input 1. Input 1 2. Input 2 3. Input 3 4. Input 4 Depending on which input you are using. ------------------------------------------------------- SDI Input Card Driver Sweetspot_WDM_driver - Format UYVY, 25.00FPS, 768 x 576, 16BPP - TV Standard PAL_I - FPS 25.0 - Input 8: Video SerialDigital ------------------------------------- Dual & Single VGA Input - Driver visRGBpro Install.exe - Format RGB565 70.fps, 1024 x 768, 16 BPP - TV Standard None - FPS 70.0 - Input Standard A thing with capture card settings... TV Format will vary depending on continent and country. For an example here in Scandinavia we use PAL-B. Usually when installing your driver you can select what country you are in, then you wont get confused with all these different standards. |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |