Hippotizer Forum Scandinavia
http://www.digigobos.com/forum/

Input settings
http://www.digigobos.com/forum/viewtopic.php?f=13&t=28
Page 1 of 1

Author:  peppe [ Sat Aug 09, 2008 9:56 am ]
Post subject:  Input settings

What are the standard settings for the input cards? Below is a list of inputs and the tried and tested best settings.
---------------------------------------------------------
S-video / Composite Input (Standard)
Driver
Btwdmdrvinstaller5.3.5
-
Format
YUY2 25.00fps,768x576,16BPP
-
TV Standard
PAL_I
-
FPS
25.0
-
Input
1 S-Video
2 Composite

Depending on which input you are using
-----------------------------------------------------
4 way Input Card
-
Driver
4inputcapture3-1.exe
-
Format
YUY2 25.00fps,768x576,16BPP
-
TV Standard
PAL_I
-
FPS
25.0
-
Input
1. Input 1
2. Input 2
3. Input 3
4. Input 4

Depending on which input you are using.
-------------------------------------------------------
SDI Input Card

Driver
Sweetspot_WDM_driver
-
Format
UYVY, 25.00FPS, 768 x 576, 16BPP
-
TV Standard
PAL_I
-
FPS
25.0
-
Input
8: Video SerialDigital
-------------------------------------
Dual & Single VGA Input
-
Driver
visRGBpro Install.exe
-
Format
RGB565 70.fps, 1024 x 768, 16 BPP
-
TV Standard
None
-
FPS
70.0
-
Input
Standard

A thing with capture card settings... TV Format will vary depending on continent and country.
For an example here in Scandinavia we use PAL-B.
Usually when installing your driver you can select what country you are in, then you wont get confused with all these different standards.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/