Hippotizer Forum Scandinavia http://www.digigobos.com/forum/ |
|
4 Input Card Crashes System http://www.digigobos.com/forum/viewtopic.php?f=13&t=19 |
Page 1 of 1 |
Author: | peppe [ Wed Aug 06, 2008 3:20 pm ] |
Post subject: | 4 Input Card Crashes System |
We have discovered that every time a composite video feed is connected to any one of the inputs on the 4 Input capture card in the Hippo, the card has to re-sync all 4 of it's inputs to the new signal. It seems that this process can be quite demanding on the card. We have had a number of reports of the cards failing or causing BSOD (blue screen of death) in windows. In these cases after investigation it was discovered that there was a faulty cable being used and so the composite signal was being disconnected and reconnected at random and this was causing the card to have to re-sync constantly - this strain caused the card to crash the system. The solution: Make sure that the cables and connectors used with a 4 inout card are solid and in good condition, also - do not plug and unplug the signal unless absolutely necessary. |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |